Quality Control

Fake or counterfeit pose a great threat to human life and health.
Anti counterfeit is not only the responsibility of every practitioner, but also the essential skills of a Qualified supplier.
With accumulation of 20 years of experience in the complex market, we demonstrated really outstanding QC abilities.

We can tell over 80% counterfeit by just one pair of eyes within few minutes..
Tell over 98% counterfeit with the support from the cooperated test house.

And our testing service normally is free, while most of testing houses charge not cheap fees.

HD Visual Inspection

High Definition Appearance testing including Silk screen, coding, High Definition detect solder balls, which can detect whether oxidized or counterfeit parts.

Final Function Testing

During a functional test the voltage level of the output signals from the DUT are compared to the VOL and VOH reference levels by the functional comparators. An output strobe is assigned a timing value for each output pin to control the exact point within the test cycle for sampling the output voltage.

Open/Short Test

The opens/shorts test(also called continuity or contact test) verifies that, during a device test, electrical contact is made to all signal pins on the DUT and that no signal pin is shorted to another signal pin or power/ground.

Programming Function Testing

To exam the read,erase and program function as well as blank checking for chips including digital memory,Microcontrollers,MCU and so on

X-RAY And ROHS Test

X-RAY can confirm whether the wafer and wire bond and die bond is good or not ; the ROHS test is via the environmental protection of the product pin and lead content of the solder coating by the photovoltaic equipment